The ITX 120 Cargo Case has an interior dimension of: 53.5" x 18" x 22" / 136.5cm x 45.5cm x 56cm

The ITX 120 Cargo Case has an exterior dimension of: 57" x 20" x 23.5" / 146cm x 51cm x 60.5cm

The ITX 120 Cargo Case has a height of 8.8'' (22.5cm) when closed and a height of 23.5'' (60.5cm) when open

The ITX 190 has interior dimensions of: 85" x 18" x 22" / 215.5cm x 45.5cm x 56cm

The ITX 190 has exterior dimensions: 88.5" x 20" x 23.5" / 225cm x 51cm x 60.5cm

The ITX 190 Cargo Case has a height of 8.8'' (22.5cm) when closed and a height of 23.5'' (60.5cm) when open

The ITX 120 Cargo Case weighs: 20kg/44 Ibs

The ITX 120 cargo case is made of Aluminum + Composite

The ITX 190 Cargo Case weighs: 29.2kg/64.3 Ibs

The ITX 190 cargo case is made of Aluminum + Composite

1x ITX190 Cargo Case

1x Non-slip mat

4 x Vehicle connection brackets Stainless steel lock plates

1 x Torx T30IP for bolt

1 x Slim combination spanner

1 x Handle + Bolts + Spring washer

1x Logo Plate

1x ITX120 Cargo Case

1x Non-slip mat

4 x Vehicle connection brackets Stainless steel lock plates

1 x Torx T30IP for bolt

1 x Slim combination spanner

1 x Handle + Bolts + Spring washer

1x Logo Plate

For optimal accessibility, we recommend mounting the ITX 190 & ITX 120 Cargo Case at the edge of the vehicle's roof, parallel to it's body.

Insert x4 M8 bolts into the groove of the bottom side.

Adjust x2 M8 bolts on the 2 sides of the cross bar as the picture shows.

Attach Mounting Plate to M8 Bolts. Utilize the narrowest hole spacing allowed by your crossbar.

Tighten M8 Nuts until the mounting plate bends 5°–15°. Marking the bolt position as shown in the picture will help for future reattachment and to monitor the hardware.

Aluminum hard mounted MOLLE panel installed on the ceiling of the box

A velcro zippered pocket organizer for the ceiling of the lid of an ITX 190 or ITX 120 cargo case

Cross bars installed on the roof of the ITX 190 or ITX 120 cargo case to increase carrying capacity of the case

The Eye Bolt Kit is the foundation for secure, adaptable mounting. Built from heavy-duty stainless steel and designed to thread seamlessly into the T-slots of your rooftop tent or cargo case, these bolts give you a rock-solid anchor point for tying down gear, attaching accessories, or rigging your setup exactly how you want it. Comes with 4 sets of eyebolts, spacers, and t-nuts.

If you are looking to strap your gear down into your ITX Cargo Case, this is the accessory to start with. This kit includes two cam buckle tie down straps, perfect for skis, snowboards, or any other longer gear.

The Soft Storage Bin puts organization at the front of mind.  It is modular in nature with rigid velcro dividers and a clear roll-top cover. Designed to fit perfectly in the ITX120 & 190 cargo cases. .

Built for those who like their gear dialed, the ITX MOLLE Patch – 24 Slot is the ultimate add-on for customizable, quick-access organization. Designed to integrate seamlessly with the ITX Cargo Cases or any Velcro surface. This patch gives you flexible storage exactly where you need it.

Whether you're hanging tools, organizing trail essentials, or mounting custom pouches, the ITX MOLLE Patch keeps your gear secure and within reach — no digging, no delays.

Built for those who like their gear dialed, the ITX MOLLE Patch – 12 Slot is the ultimate add-on for customizable, quick-access organization. Designed to integrate seamlessly with the ITX Cargo Cases or any Velcro surface. This patch gives you flexible storage exactly where you need it.

Whether you're hanging tools, organizing trail essentials, or mounting custom pouches, the ITX MOLLE Patch keeps your gear secure and within reach — no digging, no delays.

If you are looking for a modular solution for attachments to the base of your ITX Cargo Case whether you're attaching fly rod holders, spacers for skis, or our Binder Straps, this kit will help. This set includes two Metal Binders and the necessary hardware to attach.

The 3-Slot MAK Band is a streamlined mounting accessory built for simplicity and speed. Designed to hold your most-used tools and accessories in a tight, secure grip, this elastic retention band attaches to your ITX Cargo Case or any velcro surface — no extra hardware, no fuss. Whether you're organizing your EDC, camp tools, or trail gear, the 3-Slot MAK Band brings order to the chaos — so your essentials are always right where you need them. Designed for larger items.

The 4-Slot MAK Band is a streamlined mounting accessory built for simplicity and speed. Designed to hold your most used tools and accessories in a tight, secure grip, this elastic retention band attaches to your ITX Cargo Case or any velcro surface — no extra hardware, no fuss. Whether you're organizing your EDC, camp tools, or trail gear, the 4-Slot MAK Band brings order to the chaos — so your essentials are always right where you need them. Designed for smaller items.

Your keys deserve better than a tangle of jingling chaos. The Tactical Key Holder keeps your keys locked down with an aluminum D-ring and carabiner. A low-profile design made for real-world adventure. Whether clipped to your belt, pack, or MOLLE panel, this key holder stays put — no matter how rough the trail gets.

The Velcro Strap is your go-to solution for managing loose gear, bundling cables, or locking down camp essentials with ease. This strap is endlessly reusable and tough enough for real-world adventure.

• Heavy-duty hook-and-loop closure for a secure, adjustable fit
• Great for cords, hoses, tools, tent poles, and more
  
• Compatible with ITX Cargo case